How to Lift the Front End of a Truck – Here’s a Super Easy Way!

Most off-road trucks seem to be higher at the rear than at the front. This is to allow cargo loading because that’s primarily why trucks are built. However, if you plan on driving on city roads and highways, your truck has to be leveled. The front and rear have to be at the same height. Why?

How to Lift the Front End of a Truck

• To use larger tires
• Clearance
• Easier handling
• Aesthetic appeal

For these reasons and more, it is essential for you to learn how to lift the front end of your pickup truck. There are quite a few ways to do this but you have to be careful because doing it wrong could cause handling problems and may also lead to dangers while you are on the road. 

To help you eliminate these troubles and to ensure that you learn how to lift the front end of a truck with ease, we are going to explore some of the easiest ways to do this. Make sure you read carefully and choose the appropriate method! 

Using Torsion Bars

This is the most preferred method because it is easy and flexible. For some pickup trucks, it works exceptionally well. Torsion bars usually have a bolt that lets you adjust the height slowly. If you need to increase the height significantly, though, you may need bracing. 

Torsion bars also allow for quick changes later on. For example, if you want to add steel bumpers, you can replace the bars with strong ones. 

Using Coil Springs

You can buy customized coil springs based on the height you want to achieve. Then, all you have to do is to replace the springs, and you are good to go! You may also need struts for further adjustments to the ride height.  

We can’t say if this method is too easy or too hard because it depends on multiple factors, such as the type of vehicle, the coil springs, and the coil over. 

Using Body Lifts

This is another popular method for lifting the front end of the truck. Body lifts are the ideal choice if you want to add a large engine or large tires. The best part about body lifts is that they do not alter the suspension or steering. So, you will still have the same driving experience. 

Body lifts are quite affordable, but you may need wiring and other components to increase the space. How much space you need will, of course, depend on the requirement. 

Using Spacer lifts

If you just want to increase the height by 1 or 2 inches, spacer lifts will help you. A spacer goes in between the mounting location and the suspension. If you have coil springs, though, you can place it on the top or at the bottom.

Using Air Suspension

If you are looking for a super easy way to make small adjustments, air suspension is your answer. If your requirement is higher than that, you will have a very difficult time through this method. It is very important to remember this before choosing this method. 

Besides these popular methods to lift pickup trucks, you can also try independent suspension, leaf springs, solid axles, etc. However, the ones we mentioned are tested and proven to be helpful. Make sure you check the model of your vehicle and keep the requirement in mind before employing any of these methods. All the best!